MasterHeat Heated Flooring

MASTERHEAT PRODUCTS
SUNTOUCH® PRODUCTS

 

 

RadiantPEX Fittings

Let MasterHEAT provide the accessories you need for your Radiant PEX installation:

SS-T20 Compression Coupling Kits
SS-T20 Compression Coupling Kits
For joining lengths of PEX Compression Coupling Kits consist of two Compression Couplings and four female Compression fittings. We’ve packaged these items to make a convenient repair kit for field use.
NOTE: BSP stands for British Standard Pipe (threads). These threads are not compatible with NPT (National Pipe Threads). Do not attempt to couple BSP threads with NPT threads; they will leak.
NOTE: It is against most building codes to use compression couplings in inaccessible locations. Do not bury compression fittings.
3/4" Male BSP x Male Sweat Fittings
3/4" Male BSP x Male Sweat Fittings
CazzBrass PEX Compression Fittings — for connecting PEX to CazzBrass manifolds, and male compression fittings.
This CazzBrass PEX Compression Fitting is comprised of an insert fitting, a compression sleeve, and a BSP threaded nut. The brass insert is barbed, not ribbed. The compression sleeve is beveled and notched to tightly compress against the PEX. The “nose” of the fitting has O-ring to make a tight seal against the seat of the CazzBrass manifold. Carefully follow the instructions provided in order to make a tight connection. A box-end wrench is all that is needed to make these connections.
NOTE: BSP stands for British Standard Pipe (threads). These threads are not compatible with NPT (National Pipe Threads). Do not attempt to couple BSP threads with NPT threads; they will leak.
Cinch Clamp Repair Kit
CinchClamp Repair Kits
For making PEX repairs in the field.
Each CinchClamp Repair Kit contains two double-ended barbs and four CinchClamps, enough for two splices. Each kit includes instructions to help insure that the repair is done properly. Be sure to pressure test the repair after work is performed. Wrap all buried splices in electrician’s tape to protect the brass against possible corrosion.
Copper CrimpRings
Copper Crimp Rings
For securing PEX to brass crimp fitting.
Crimp x ale Sweat (copper adapter) Elbow
Crimp x ale Sweat (copper adapter) Elbow
Use these Crimp x Sweat Elbow Fittings to speed the connection of PEX supply lines to baseboard and hydro-air units.
Crimp x Crimp brass Couplings
Crimp x Crimp brass Couplings
For making field rapairs or extending PEX lines.
Use Crimp x Crimp Brass Couplings to make field repairs and connections when necessary. Be sure to closely follow all guidelines when making field repairs or connections.
Order CinchClamps or CrimpRings separately. All 1-1/4” crimp fittings are equipped with O-rings.
Crimp x Crimp Tees (equal tees)
Crimp x Crimp Tees (equal tees)
Sold in quantities of 10
Crimp x Crimp Tees (unequal tees)
Crimp x Crimp Tees (unequal tees)
Run x Run x Branch (1 x 2 x 3)
Qty. 10
Crimp x Crimp Wlbows (equal elbows)
Crimp x Crimp Wlbows (equal elbows)
Sold in quantities of 10
Crimp x Femaile Sweat (copper) Adapters
Crimp x Female Sweat (copper) Adapters
For connecting PEX to Stainless Steel manifolds.
Crimp x Female Sweat (copper fitting) Elbow
Crimp x Female Sweat (copper fitting) Elbow
For connecting PEX to baseboard and hydro-air units. Qty of 10.
NOTE: Use these Crimp x Sweat Elbow Fittings to speed the connection of PEX supply lines to baseboard and hydro-air units.
Crimp x Male NPT Adapters
Crimp x Male NPT Adapters
For connecting PEX to female fittings and valves. Qty of 10.

NOTE: All 1-1/4" crimp fittings are equipped with O-rings.
Crimp x Male NPT Elbows
Crimp x Male NPT Elbows
Sold in quantities of 10
Crimp x Male Sweat (copper fitting) Adapters
Crimp x Male Sweat (copper fitting) Adapters
For connecting PEX to sweat fittings or baseboard manifolds. Qty of 10 Note: All 1-1/4” crimp fittings are equipped with O-rings
Crimp Ring Repair Kit
Crimp Ring Repair Kit
For making PEX repairs in the field.

Each CrimpRing Repair Kit contains two double-ended barbs and four CrimpRings, enough for two splices. Each kit includes instructions to help insure that the repair is done properly. Be sure to pressure test the repair after work is performed. Wrap all buried splices in electrician’s tape to protect the brass against possible corrosion. All 1-1/4” crimp fittings are equipped with O-rings.

Qty - 1kit
Mini Ball and Balancing Valves
Mini Ball and Balancing Valves
For circuit isolation and balancing on field-built manifolds.
Use Mini Ball Valves to isolate and/or regulate the flow of individual tubing circuits. For more exact flow balancing, use Mini Balancing Valves, where balancing is accomplished by rotating the threaded spindle below the brass safety cap. Each turn represents approximately 10% of full flow. Approximate Cv is 3.0 (These ball valves are not available in other sizes.)

Qty 1
PEX Swivel Crimp Fitting
PEX Swivel Crimp Fitting
Use these SS-T20 Crimp Fittings to connect PEX to our Stainless Steel or T20 Custom Tubular Manifolds. Order CrimpRings or CinchClamps separately.
NOTE: SS-T20 compression fittings designated for T20 Custom Tubular Manifolds or Stainless Steel Manifolds are not compatible with CazzBrass manifolds and vice versa.
NOTE: BSP Stands for British Standard Pipe (threads). These threads are not compatible with NPT (National Pipe Threads). Do not attempt to couple BSP threads with NPT threads; they will leak Qty of 10

Qty 1
SS-T20F PEX Compression Fittings
SS-T20F PEX Compression Fittings
SS-T20F PEX Compression Fittings — for connecting PEX to Stainless Steel manifolds, and Custom Tubular T20 compression manifolds, or 3/4” male BSP x male sweat fittings. This SS-T20F PEX Compression Fitting is comprised of an insert fitting, a compression sleeve, and a BSP threaded nut. The brass insert is barbed, not ribbed. The compression sleeve is beveled and notched to tightly compress against the PEX. The “nose” of the fitting has an O-ring to make a tight seal against the inside wall of the male T20 fitting, T20 manifold, or Stainless Steel manifold. Carefully follow the instructions provided in order to make atight connection. A box-end wrench is all that is needed to make these connections.

NOTE: These Female Compression Fittings are designed for Stainless Steel and Custom Tubular compression manifolds only, and are not compatible with CazzBrass manifolds.

NOTE: BSP stands for British Standard Pipe (threads). These threads are not compatible with NPT (National Pipe Threads). Do not attempt to couple BSP threads with NPT threads; they will leak.

Qty 1
Stainless Steel Cinch Clamps
Stainless Steel Cinch Clamps
For fast, easy, one-tool connections.

*See our MasterHEAT Pricing page for itemization & ordering information

 

Copyright © MasterHeat.com. All Rights Reserved.